| |
|
Captain Beds, Bunks and Mid Sleepers |
|
Corona occasional furniture |
|
|
In order to preserve its unique appearance and unmistaken character, no attempt
is made to conceal the natural flaws and variations in the timber used.
Knots, soft texture and variation in colours or any other blemishes however
small are all part of the unique experience of pine furniture.
With the passing of age the colour will darken, doors and drawers may shrink
and splits may occur, this is not seen as defective as it highlights the
natural beauty of the timber.
All drawer bases should be line with paper before putting clothes inside as
timber contain natural resin, which is difficult to be removed.
The type of pine used is not the same as that used by European manufacturers.
The grain is more open and there are different types of knots, shakes
and naturally occurring blemishes. Whilst every effort is made to ensure
that the product reaches the customer in the best possible condition,
due to the nature of the timber there will always be features and marks
that may appear to be manufacturing faults but are actually naturally
occurring.
Due to the nature of the timber it is possible that marks can be made
to it during assembly. Therefore it is necessary to ensure that it is
assembled on a flat surface clear of any small items that could dent or
scratch the products, a freshly hoovered carpet would be the ideal surface.
Following a recognition that most other products supplied to the market are very
thin we have made a conscious effort to make our products much chunkier
and sturdier. Therefore all our products are made using 21mm and 32mm
thick timber. The drawer sides and backs are made from 21mm thick pine
to ensure that the product is strong and durable.
All of the products are easy to assemble with very clear instructions included
with each piece of furniture.
The furniture is constructed using a combination of screws, dowels and
glue. This ensures that the finished product is very sturdy.
Universal components are used to ensure that the quantity of spare parts required
is kept to a minimum.
Flat pack products: All of the products are packaged in very strong double
walled cardboard boxes to minimize the risk of damage during transport
and handling. The products are packaged to ensure that the weight of each
box complies with current manual handling regulations.
All products are made of 100% solid pine (except drawer bases and back
panels ) and all the parts which have been lacquered either blue or green,
these parts are made of MDF to ensure a superb even finish.
We reserve the right to change any product or its design without further
notice. All the information provide, ie: dimensions, colours, were right
at the time the site/brochure was made available. Images shown on this
site/brochure and colour on this site/brochure may not match the actual
products purchased. |
|
|
